Editing Brake System Torque Settings

When performing a brake job on a Mk7 GTI or Golf R, you will need to properly torque the bolts (and replace if torque-to-yield) to ensure proper assembly.

== Front Brakes ==

* Rotor set screw: 3 ft-lb (4 Nm)
* Brake caliper carrier to spindle: 148 ft-lb (200 Nm) - ''Clean if reusing''
* Brake caliper to carrier sliders: 26 ft-lb (35 Nm) - ''Replace''

== Rear Brakes ==

* Rotor set screw: 3 ft-lb (4 Nm)
* Brake caliper carrier to spindle: 66 ft-lb (90 Nm) + 90° - ''Replace''
* Brake caliper to carrier sliders: 26 ft-lb (35 Nm) - ''Replace''

[[Category:Torque Settings]]
[[Category:Technical]]
[[Category:Specifications]]